A D11 dozer runs on 7 liters of diesel fuel per hour under moderate conditions. This makes it five times as fuel-efficient as smaller graders.
Generally, graders burn through six to eight gallons of water per hour. As a result, more giant graders typically burn more fuel than smaller ones. But this difference isn’t universally true.
There are several factors to consider when calculating the fuel-usage of a grader.
Does the Fuel Consumption of a D11 Dozer Impact its Usefulness for Angle Dozing?
The fuel consumption of a D11 dozer directly affects its usefulness for angle dozing. Lower fuel consumption allows for longer operating hours and reduces costs. Efficient fuel usage ensures optimal performance during angle dozer uses, allowing operators to work uninterrupted and accomplish more tasks within a given timeframe.
Average excavation costs for a D11 dozer
Two Cat D11 dozers work in sequence to move the waste material to the final spoil. They are capable of pushing 466,737 bcm of material in a single pass.
The excavator pushes stockpiled material to its final spoil. Excavation costs depend on the excavator’s size and the amount of material to move. In general, a D11 dozer costs $2.16 per bcm moved.
In addition to the cost of the dozer, the rental includes other aspects of the dozer. These machines are used to dig through different types of soil and terrains.
Depending on the tasks they’ll be performing, dozers come with different types of blades. The S-blade is the most common and is typically used for pushing.
The U-blade, also called the universal blade, is a great choice for moving materials.
The cost of digging an acre can vary greatly, but generally, excavators cost around $1,400 to $3,200. This cost is for the cost of preparing the area for concrete.
It can increase if you hit an underground obstacle, like a tunnel. The cost of cleaning an acre of land depends on the reason for excavating.
The cost will also depend on the area’s geology and how much of it needs to be cleared.
Depending on the complexity of the project, a D11 dozer can cost anywhere from $1,600 to $4,400. The cost of the equipment and the labor to operate them will vary.
A typical D11 dozer hires one operator. The cost of the dozer itself can be up to $3,200. The price of concrete varies widely and it is recommended to contact a ReadyMix provider for an accurate estimate.
Average fuel consumption of a D11 dozer
The D11 XE dozer was recently released, promising to offer the lowest cost per bank cubic meter (BCM) in dozing operations.
In addition, the machine’s design features 60 percent fewer moving parts, resulting in better fuel efficiency and longer rebuild intervals.
The D11 XE has several similarities with the mechanical-drive model, including the fully integrated Cat powertrain and electronic controls.
The average fuel consumption for a D11 dozer is 24.7 gallons of diesel per hour, or about $1.25 gallons per hour under moderate conditions.
By comparison, a medium-sized grader uses six to eight gallons of diesel per hour. The largest dozers, however, are the Liebherr PR 764 Litronic and the ACCO Super Bulldozer.
The Cat D11T dozer features an advanced automated blade assist and enhanced auto shift, with automatic climate control and optional automated ripper control.
Both dozers feature an 850-net-horsepower Cat C32 engine. The D11T and D11 can reach a blade capacity of 57 cubic yards, 43 cubic meters, and 24846 pounds.
The D11T CD is equipped with a Cat Enhanced Auto Shift for even greater productivity and efficiency, which automatically selects the correct gear and engine speed to match the terrain.
A D11R dozer’s fuel consumption is low at low engine load, and increases to nearly five gallons per hour under medium load. It has a fuel tank capacity of 165 gallons.
The D11R can also be used on short or long hauls. In addition to fuel consumption, a D11R dozer’s speed is high at ten miles per hour.
The D11 can be adapted for rock and agricultural ripping. The ripper is a long claw-like device. They are available in a single or dual shank configuration.
Single-shank rippers are more effective for ripping heavy rock. Ripped rock is broken into small rubble that can be removed for grading. For more information, visit the D11 website.
The D11 is an enormous bulldozer manufactured by Caterpillar Inc. in East Peoria, Illinois. It is used mostly in the mining industry.
A D11 is designed primarily as a bulldozer but can also load scrapers and rip rock overburden. Its fuel consumption is approximately one liter per hour, which is a high figure for a bulldozer.
Average cost to service a D11 dozer
Keeping a D11 dozer in tip-top shape is an ongoing process, and it can be costly if it is not serviced on time.
Dozer manufacturers and dealers work hand in hand to ensure that your investment is well-maintained and up to the task at hand.
Whether your machine is a wheeled or track-type model, the maintenance and servicing process can be expensive or low-cost, depending on your needs.
Cat D11 dozers have many new and improved features. Its load-sensing hydraulics, high-horsepower reverse, and redesigned main frame reduce the overall cost of ownership.
This dozer also has standard features like automated blade assist, which increases productivity and reduces operator workload.
And thanks to the enhanced auto-shift, fuel efficiency is maximized. A D11 can be serviced quickly and cost-effectively, so it’s worth comparing the prices of different models.
If you’re looking to buy a new D11 dozer, you may want to consider repowering it. The engine will have a more efficient ACERT engine than the 3508 engine and will be much cleaner.
It will also likely result in a 15 percent lower fuel consumption, which is a significant bonus over the life of the equipment. And you won’t pay much more to service a D11 dozer compared to an equivalent model of the same model.
Cat D11 dozers are powerful machines with outstanding features. A D11 dozer’s extra-tall blade makes it perfect for clearing furrows and digging foundations.
It can make almost any move – from clearing a field to digging a foundation. And it costs just over $20,000 to buy a brand-new Cat D11 Dozer. It is an excellent investment that will last for many years.
A D11 dozer has a higher capacity engine oil sump, extending preventive maintenance intervals by up to 500 hours.
Its ground-level electrical center offers easy access to the lockout control, engine shutdown switch, and switches for the access ladder raise/lower.
Its operator compartment is also equipped with more advanced features, including delayed egress lighting, which lets the operator exit the illuminated dozer after hours.
The main costs of operating a D11 dozer are fuel and wages. The D11’s fuel consumption is high, but it equals the work it does.
The more fuel the machine uses, the more material it moves. So while high fuel consumption may be bad, the higher the cost per hour, the higher the profit will be.
However, it is important to note that not all changes in the maintenance of a dozer increase profits.